How do I setup the Skotti mask for use?
Insert the Carbon Filter
Insert the carbon filter so that it lays flat and is seated in all corners of the face mask pocket. It’s often easier to start at one side and work across.
The included two carbon filters can be used together to increase effectiveness, but typically a single filter is all that is needed.
Insert the Filter Frame (optional)
Open the face mask pocket and start by placing the frame center in the middle of the pocket. Next, gently lift the pocket “flaps” up and over the corners of the frame, one at a time until the frame is fully seated.
Adjust the Nose Clip
With the scarf on and in place, gently press the sides of the nose clip until the pad lightly touches the sides of the nose (no need to pinch the nose).
That’s it! You can lower and apply the scarf instantly when needed.
back to FAQ
Insert the Carbon Filter
Insert the carbon filter so that it lays flat and is seated in all corners of the face mask pocket. It’s often easier to start at one side and work across.
The included two carbon filters can be used together to increase effectiveness, but typically a single filter is all that is needed.
Insert the Filter Frame (optional)
Open the face mask pocket and start by placing the frame center in the middle of the pocket. Next, gently lift the pocket “flaps” up and over the corners of the frame, one at a time until the frame is fully seated.
Adjust the Nose Clip
With the scarf on and in place, gently press the sides of the nose clip until the pad lightly touches the sides of the nose (no need to pinch the nose).
That’s it! You can lower and apply the scarf instantly when needed.
back to FAQ